Mold in homes

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 7:10 am

Groper, can you explain this, if those treatments are as safe and harmless as you claim?
P6271566-web.jpg
P6261559-1-web.jpg
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
Blind groper
Posts: 3997
Joined: Sun Mar 25, 2012 3:10 am
About me: From New Zealand
Contact:

Re: Mold in homes

Post by Blind groper » Mon Jan 21, 2013 8:14 am

Explain what?
For every human action, there is a rationalisation and a reason. Only sometimes do they coincide.

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 8:31 am

That nothing grows in the area where run off water from that treated electricity pole runs. The obvious explanation is that poison has leached out of it and killed the stuff that normally grows on that cliff, isn't it :ask:
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
JimC
The sentimental bloke
Posts: 74180
Joined: Thu Feb 26, 2009 7:58 am
About me: To be serious about gin requires years of dedicated research.
Location: Melbourne, Australia
Contact:

Re: Mold in homes

Post by JimC » Mon Jan 21, 2013 8:35 am

MiM wrote:That nothing grows in the area where wash out water from that treated electricity pole runs. The obvious explanation is that poison has leached out of it and killed the stuff that normally grows on that cliff, isn't it :ask:
Highly unlikely that a leachate would remain within such a narrow path...

Also, please note frame for passionfruit vine, made of treated pine years ago, covered by vigorous growth and rampant tomatoes immediately in front...

Image
Nurse, where the fuck's my cardigan?
And my gin!

User avatar
Blind groper
Posts: 3997
Joined: Sun Mar 25, 2012 3:10 am
About me: From New Zealand
Contact:

Re: Mold in homes

Post by Blind groper » Mon Jan 21, 2013 8:44 am

MiM

I think what you have called a leachate area is actually a path.

Any pole that permitted so much leaching would result in the sacking of the entire team that treated it. Vacuum/pressure treated timber does not behave like that.
For every human action, there is a rationalisation and a reason. Only sometimes do they coincide.

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 8:58 am

Blind groper wrote:MiM

I think what you have called a leachate area is actually a path.

Any pole that permitted so much leaching would result in the sacking of the entire team that treated it. Vacuum/pressure treated timber does not behave like that.
No path there, not ants not anything. That's 15 m from my summer cottage and on my family's property,, so I have pretty good control over what happens there. And anyway, it starts right at the base of the pole and gets wider down the hill, just as running water is expected to behave. No similar thing to be found from tree trunks, or anything else in the area.

That pole was installed maybe 20 years ago, so no "ancient formula form the sixties" either.

Edit: I am using treated would for docks, fences and other outdoor construction too. I am not claiming that dramatic effects are seen everywhere, just that they do exist.
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 9:15 am

Here is another picture, where you can see similar streaks of bare cliff, going downhill from the metal rods used to fasten the pole, another likely path for water to run. You can also see that the grass doesn't seem to be affected, only the lichens and such (which, I guess are closer relatives to what those poisons are designed to kill).
P6261545-web.jpg
Edit: The bare patch of cliff at the back is held clear by us.
Last edited by MiM on Mon Jan 21, 2013 9:23 am, edited 3 times in total.
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
JimC
The sentimental bloke
Posts: 74180
Joined: Thu Feb 26, 2009 7:58 am
About me: To be serious about gin requires years of dedicated research.
Location: Melbourne, Australia
Contact:

Re: Mold in homes

Post by JimC » Mon Jan 21, 2013 9:16 am

MiM wrote:Here is another picture, where you can see similar streaks of bare cliff, going downhill from the metal rods used to fasten the pole, another likely path for water to run.
P6261545-web.jpg
If significant amounts of zinc (or other metal) salts were coming from the metal struts...?
Nurse, where the fuck's my cardigan?
And my gin!

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 9:20 am

JimC wrote:
MiM wrote:Here is another picture, where you can see similar streaks of bare cliff, going downhill from the metal rods used to fasten the pole, another likely path for water to run.
P6261545-web.jpg
If significant amounts of zinc (or other metal) salts were coming from the metal struts...?
Then the streaks coming from the struts would be more prominent than the one coming from the pole, not the other way around?
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
JimC
The sentimental bloke
Posts: 74180
Joined: Thu Feb 26, 2009 7:58 am
About me: To be serious about gin requires years of dedicated research.
Location: Melbourne, Australia
Contact:

Re: Mold in homes

Post by JimC » Mon Jan 21, 2013 9:25 am

Were those poles treated with the copper. chrome, arsenic salts that BG mentioned? That's the type of timber preservative he and I are referring to - it usually gives the timber a distinct greenish tinge...
Nurse, where the fuck's my cardigan?
And my gin!

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 9:40 am

Greenish, yes. At least a couple of articles I found says that CCA was the most common (only?) treatment for poles from the 1950's to 2006, when the use was banned by EU. The Finnish chemical safety authority also warns (and forbids) against use of old poles in any private construction, but especially when they can come in contact with growing foodstuff (like Gropers wines and tomatoes).
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
Blind groper
Posts: 3997
Joined: Sun Mar 25, 2012 3:10 am
About me: From New Zealand
Contact:

Re: Mold in homes

Post by Blind groper » Mon Jan 21, 2013 6:29 pm

I would sack your pole supplier.

Either the poles were not treated with CCA (there are other preservatives), or else the fixative was incompetently applied.

Bluntly, that is not how properly treated CCA timber behaves. There is something badly wrong there, if something is leaching out and killing lichens. It would be worth taking a soil sample and doing a quick analysis. If you were American, you could sue the timber treatment company.
For every human action, there is a rationalisation and a reason. Only sometimes do they coincide.

User avatar
MiM
Man In The Middle
Posts: 5459
Joined: Wed Feb 24, 2010 10:07 pm
Location: Finland
Contact:

Re: Mold in homes

Post by MiM » Mon Jan 21, 2013 6:58 pm

Blind groper wrote:I would sack your pole supplier.

Either the poles were not treated with CCA (there are other preservatives), or else the fixative was incompetently applied.

Bluntly, that is not how properly treated CCA timber behaves. There is something badly wrong there, if something is leaching out and killing lichens. It would be worth taking a soil sample and doing a quick analysis. If you were American, you could sue the timber treatment company.
More like the electricity company in that case, as it is their pole. Have to admit that those poles are known to be more heavily treated than any timber that is sold to private customers (that's why it isn't legal to sell them to consumers, either new or used). They want to get maximum time from them in harsh conditions.

But if you google, you will find evidence that the treatment does leak out of the wood. More in some cases than in other. Arsene seems to be the most leaky, and I believe that is the part that is now forbidden in most uses in the EU.
The first principle is that you must not fool yourself, and you are the easiest person to fool - Richard Feynman

User avatar
Tero
Just saying
Posts: 51341
Joined: Sun Jul 04, 2010 9:50 pm
About me: 15-32-25
Location: USA
Contact:

Re: Mold in homes

Post by Tero » Mon Jan 21, 2013 7:39 pm

They may use other metals, bit arsenic did not survive past 2004
http://www.healthybuilding.net/arsenic/index.html


http://en.m.wikipedia.org/wiki/Wood_preservation

User avatar
Blind groper
Posts: 3997
Joined: Sun Mar 25, 2012 3:10 am
About me: From New Zealand
Contact:

Re: Mold in homes

Post by Blind groper » Mon Jan 21, 2013 9:08 pm

May be related to the species of timber used for the pole, as well. Some species are more easily treatable. Here in NZ, we use mostly radiata pine, which just loves the CCA salts, and holds onto them like crazy. In Oz, they also treat eucalypt that way, and it is not as successful. Do you know what poles are made of at your place?
For every human action, there is a rationalisation and a reason. Only sometimes do they coincide.

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests